Honda ATV Forum banner

Search results

1-20 of 74 Results
Advanced Search
  1. Warn Winch Wires

    ATV General Discussion
    If you goto a auto junk yard, cars and trucks have one to two 8 gauge wires that are usually 20ft plus. That's where I got mine. It was free, and took 10 minutes to remove from a harness. Just putting it out there.
  2. How to read honda's model numbers ( or letters in this case ).

    Repair & Maintenance
    Old thread, but I've been wondering this for 3 years now. what does ex2 mean on my 2002 trx300ex Example: Trx300ex2
  3. 2013 honda rancher fm

    ATV General Discussion
    I am just curious if there is a crank case vent on the efi honda rancher's like the previous years that was carbureted. I ask because I want to make sure the vent is not clogged. A gentleman told me that years previous models if the vent was clogged it could cause light smoking to moderate.
  4. 1987 250x

    Honda TRX
    The valves was very tight when I got the quad as well.
  5. 1987 250x

    Honda TRX
    I have not tried the cdi. I am getting a new coil and plug tomorrow if honda is open if anything maybe a uto parts store. I adjusted valves to what the repair manual states. .004 I have not done a compression test yet. I dont have a gauge in my possession yet. I was thinking in my head maybe...
  6. 1987 250x

    Honda TRX
    Soo. I bought a new carb, a japan built carburetor. I installed it and the quad cranks first kick. But still Boggs down when throttle is applied aggressively. Maybe the needle with the C clip needs adjustment? I adjusted the fuel mixture needle too 2.5 turns out and went in an out still...
  7. 1987 250x header pipe and exhaust

    ATV Parts for Sale
    Thank you! I believe it is a dg pipe, comparing to the google images. I really appreciate that, I would have never known!
  8. 1987 250x header pipe and exhaust

    ATV Parts for Sale
    I'm not really sure of the brand to be honest. It sounds good; like a drag bike. Just not my type of loud lol
  9. 2009-2013 trx420 front bumper

    ATV Parts for Sale
    Looking for a front bumper (metal) for a trx420 09-13 please respond to the post not direct message (not sure how to use it haha) the shape of the part does not matter. Even if it's a slight bend or dent. Nothing bad please
  10. Anyone local to asheboro, NC?

    ATV General Discussion
    I need help point blank. I bought an 87 trx250x running. I bought a carb rebuild kit, and it just dont seem like the right parts. Unless the previous owner jetted the carb. I say that because everything on the carb is bigger than the parts I ordered. Maybe it's a 300ex carb? Because it's the...
  11. 1987 250x header pipe and exhaust

    ATV Parts for Sale
    I have a 1987 with a aftermarket (unknown name) full exhaust, I'd love to trade for a stock. Its sounds good just to loud for the pleasure of riding in the neighborhood. I live in Asheboro nc. I working in Greensboro nc.
  12. plastics

    ATV Parts for Sale
    Year, make and model?
  13. 1987 250x

    Honda TRX
    I adjusted the brass piece in the last photo up towards the seat as if the carb was on the quad and I also brought the needle up towards the seat, moving the C clip down on it to the 4th notch I believe it was. I have a 02 300ex an I compared carbs, they look identical, on the 300 the needle is...
  14. 1987 250x

    Honda TRX
    Also I after I adjusted the valves its smokes pretty good now, is that improper adjustment or maybe wear and tear?
  15. 1987 250x

    Honda TRX
    Well I adjusted it as far as it would go which was not further than where it was at in the picture. It drives better, when I hit the gas it still has a delay but it pheesable until the rebuild kit comes in.
  16. 01 300Ex- no spark

    Honda TRX
    I had the same problem, I checked everything and all of the circuits and plugs read out good, it even the cdi read good.it turns out it was still the cdi after I tried different ones. I bought a used cdi and luckily it worked. I aslo bought a new cdi aftermarket which was garbage. Did you use a...
  17. 1987 250x

    Honda TRX
    That's how far it is I assume it needs to scoot down some?
  18. 1987 250x

    Honda TRX
    This is the piece I mentioned I'm not sure how this needs to be adjusted
  19. 1987 250x

    Honda TRX
    It sounds like the choke is engaged until it clears up
  20. 1987 250x

    Honda TRX
    So I tore down the carburetor again to tinker around before the new parts came in, everything's there like it should be from reading the manual. I lowered the clip on notch on the throttle needle I noticed that the guide on the other side of the carburetor has threads and an adjustable nut on...
1-20 of 74 Results
Top