|Topic Review (Newest First)|
|01-03-2016 09:10 AM|
|theblue300||I made a facebook just for the honda 300 club. I used the highlifter forums for help most of which i tried to with old posts since hardly anyone is around anymore.|
|01-03-2016 06:28 AM|
|fishfiles||I have heard that FaceBook is a good source to buy bikes and parts too , but I don't do Facebook , maybe I should|
|01-03-2016 06:21 AM|
The Honda 300 Club Facebook page is where all the action is at.
Sent from my iPhone using Tapatalk
|01-03-2016 02:52 AM|
|fishfiles||Awesome , I like them both , the blue one is real easy on the eyes but I like the tan one better , building a big 300 is on my bucket list ------- what other sites do you go to for info on big builds? --- Highlifter's site use to be nice , had a lot of traffic for the mods I like to see , but since they came up with all the new rules and censorship to make it a Highlifter only sales site it seems to have destroyed the site and it is almost a ghost town|
|01-02-2016 02:12 PM|
No, I think you are confused i didnt buy that 300 i built mine this is that 300.
This is mine
I still need to build a bracket to take up the sag from the front shocks being run at a steep angle.
I built the swing arm that i mentioned earlier because of the swing arm on the tan 300 and i had everything to do it.
|01-02-2016 02:07 PM|
|fishfiles||so you didn't build it , you bought it the way it is and your finishing it ? , how's about some pics from the side an front|
|01-02-2016 01:52 PM|
|theblue300||I dont know much about was done to that 300 all i know is that it had a big lift a 54% and a 477cc 4 valve custom engine.|
|01-02-2016 01:45 PM|
|fishfiles||Wow , that's looking bad to the bone , the paddle is about the biggest I ever seen , looks like a 300 end , but the center tube section looks either custom or you grinded on it|
|01-02-2016 09:36 AM|
Another thing too is i based my swing arm off of one that i know worked the idea came from this one. If i ever get time i was planning on adding 1-2 more braces and then call it good until it breaks or doesnt.
|01-02-2016 09:33 AM|
|theblue300||It is running, i havent been on a ride to try it out though, i think it should be strong enough and if its not then i will have to make it stronger. The differential is packed full of grease so it keeps the water out. The out put shaft on the motor has a seal, its not much different than the side shaft seal so im not worried about that really.|
|This thread has more than 10 replies. Click here to review the whole thread.|