|Topic Review (Newest First)|
|09-15-2018 11:06 AM|
A friends dad bought a P1000 last year, not really sure if its a 16 or 17 though. My friend and i were riding it and i noticed that the heat in the cab was terrible. My buddy mentioned that Honda had a cover or something that is supposed to block the heat. When they brough it in for the post break in service the cover was installed. Ive only rode in it once for a short time since the cover was installed and to me i think it helped alot, quieted the cab down some too. Dont get me wrong you still feel heat but not nearly as much as you did before.
Ive never really looked into it but could there be a aftermarket company that makes a heat shield or something?
You could maybe even try putting some of this on the cover.
|07-09-2018 10:01 PM|
I am the original guy who asked about what heater to consider, but "Jeeown69" was right about the P1000-3 having a hot cab. I've ridden quite a few trails this summer, and the heat in the cab is indeed a problem. I happened to have a full Honda glass windshield with no venting which makes it even warmer. I am no longer considering a heater, and I'll wait until winter before even think about a heater. I have a feeling that the cab will be fairly comfortable w/o a heater with the fabric doors that I'll have on it.
Frankly I am surprised Honda hasn't come up with a venting solution to relieve the heat issue. They did come out with a heat shield of sorts, but it's a economical attempt to resolve a problem that needs more than a fireproof "piece of cardboard." IMHO The shield is standard on the 2018, and I think it's a free "fix" for older P1000's. The seat and your legs get uncomfortably hot as the machine is now even with the "heat shield." We stuff towels around the seats in an attempt to stop some of the heat from getting into the cab. It is not a minor problem. Hopefully in cold weather the problem may be a bit of an asset, but most of our riding is in the summer.
|03-05-2018 08:46 AM|
|farmer002||How's the machine going? Did you get the heater problem figured out?|
|01-11-2018 09:43 AM|
It would be great to have some details on that ingenious solution for the heater - sounds like a product opportunity for someone.
I have the Honda Warn winch mount to answer another question, and I have become aware of the need for a second battery. I sure wish Honda would have put in a larger battery like suggested - duh.
I am just getting around to mounting a rear DNR plate on the back on the UTV, and Honda sure didn't allow for that either. I guess I'll make a bracket to fasten over the muffler guard using the guard screws and mount the plate there. With the dump bed, this is a bit of a challenge. A modest amount of thought by Honda would have made this a lot easier too. My decals ended up on my doors which isn't too bad, but again a little thought on Honda's part would have been appreciated. Maybe I expect too much.
|11-23-2017 09:43 PM|
Originally Posted by Redtape View Post
|11-23-2017 07:03 PM|
I'll attempt to take some pictures next week after I get the trailer. I might as well take pictures of the whole rig before it gets dirty.
I am appreciative of all the input, and I'll look into a second battery with an isolator. I'll have to do a little research on the isolator to see where to buy and how to install. I'm sure is simple, but I'll look for some basic instructions which may be included with the isolator. Having an second battery can't be a bad idea - no pull cord like my Foreman. Besides, can you imagine what that battery would mean to someone stranded deep in the woods, far from a WalMart, with a bad battery? It would be nice to be able to bail someone out of a jam.
|11-23-2017 08:08 AM|
|Goober||BTW an isolator is basically a harness with diodes to network charges to and from the batteries “isolating” them from one another. Gotta have it won’t charge both batteries without it|
|11-23-2017 07:58 AM|
Originally Posted by shadetree View Post
|11-23-2017 06:40 AM|
|redtherocket||how bout a picture of this thing... I know there everywhere online, but I wanna see this one...|
|11-22-2017 11:12 PM|
Originally Posted by wheelsquad View Post
|This thread has more than 10 replies. Click here to review the whole thread.|