Honda ATV Forum banner

1984 TRX 200 Basic Wiring Required

3K views 3 replies 3 participants last post by  fishfiles 
#1 ·
Hi Everyone,

I've been lucky to pickup a 1984 TRX 200 free of charge but with no key and wiring harness is buggered.

What I'm chasing is a basic wiring plan to use the pullstart only and cutoff switch. No lights,battery,starter ect..ect..ect..

Many thanks
 
#2 ·
welcome to the forums. don't run it without a battery !. you should start with replacing the wire harness, buy a ignition switch, a good battery, then take it from there.
 
#4 ·
no key , wiring booger up , got it free = sounds fishy to me -------- word is , if you run it without a battery , then it will burn up the stator -------- finding parts for that bike can be a night mare , it was very limited production , might be best to "Let It Go"
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top