Oil Change Light? - Honda ATV Forum
Repair & Maintenance Having problems? Doing a rebuild? All Repair/Maintenance Discussions here.

 
LinkBack Thread Tools Display Modes
post #1 of 6 (permalink) Old 06-11-2011, 11:11 AM Thread Starter
Junior Member
 
Lucas867's Avatar
 
Join Date: May 2011
Posts: 9
Oil Change Light?

Does anyone know how to reset the oil change light on a 2007 honda rancher es? I do not have the manual.

Thanks,

Lucas

Last edited by Lucas867; 06-11-2011 at 11:13 AM.
Lucas867 is offline  
Sponsored Links
Advertisement
 
post #2 of 6 (permalink) Old 06-11-2011, 12:19 PM
Super Moderator
Supporting Member
 
Helmut's Avatar
 
Join Date: Oct 2009
Posts: 23,581
Liked: 25 times
Press and hold the hourmeter/odometer/tripmeter select button and turn the ignition switch to "on" for more than 5 seconds and the indicator message should go off.

Most 4-wheeler problems are caused by a loose nut connecting the handlebars and the seat!!

You only need two tools in life -- WD-40 and duct tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape.
Helmut is offline  
post #3 of 6 (permalink) Old 06-11-2011, 11:46 PM Thread Starter
Junior Member
 
Lucas867's Avatar
 
Join Date: May 2011
Posts: 9
So hold the button while the keys off, then turn the key on still holding it and after 5 seconds itll go off?

Quote:
Originally Posted by Helmut View Post
Press and hold the hourmeter/odometer/tripmeter select button and turn the ignition switch to "on" for more than 5 seconds and the indicator message should go off.
Lucas867 is offline  
Sponsored Links
Advertisement
 
post #4 of 6 (permalink) Old 06-11-2011, 11:52 PM
Super Moderator
Supporting Member
 
Helmut's Avatar
 
Join Date: Oct 2009
Posts: 23,581
Liked: 25 times
Quote:
Originally Posted by Lucas867 View Post
So hold the button while the keys off, then turn the key on still holding it and after 5 seconds itll go off?

Quote:
Originally Posted by Helmut View Post
Press and hold the hourmeter/odometer/tripmeter select button and turn the ignition switch to "on" for more than 5 seconds and the indicator message should go off.
Yes, that's correct.

Most 4-wheeler problems are caused by a loose nut connecting the handlebars and the seat!!

You only need two tools in life -- WD-40 and duct tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape.
Helmut is offline  
post #5 of 6 (permalink) Old 06-12-2011, 12:05 AM Thread Starter
Junior Member
 
Lucas867's Avatar
 
Join Date: May 2011
Posts: 9
Ill give it a try in the morning. Thanks for the advice. Do you like your rancher?

Quote:
Originally Posted by Helmut View Post
Quote:
Originally Posted by Lucas867 View Post
So hold the button while the keys off, then turn the key on still holding it and after 5 seconds itll go off?

Quote:
Originally Posted by Helmut View Post
Press and hold the hourmeter/odometer/tripmeter select button and turn the ignition switch to "on" for more than 5 seconds and the indicator message should go off.
Yes, that's correct.
Lucas867 is offline  
post #6 of 6 (permalink) Old 06-12-2011, 12:37 PM
Super Moderator
Supporting Member
 
Helmut's Avatar
 
Join Date: Oct 2009
Posts: 23,581
Liked: 25 times
Quote:
Originally Posted by Lucas867 View Post
Ill give it a try in the morning. Thanks for the advice. Do you like your rancher?
You're welcome. I don't have a Rancher, but they're good ATVs. By the way, you can download an owner's manual for your quad at the link below.

ATV | Owners Manuals | Owning A Honda | Honda MPE

Most 4-wheeler problems are caused by a loose nut connecting the handlebars and the seat!!

You only need two tools in life -- WD-40 and duct tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape.
Helmut is offline  
Reply

  Lower Navigation
Go Back   Honda ATV Forum > Honda ATV Technical Discussions > Repair & Maintenance

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Honda ATV Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome