http://www.hondaatvforums.net/forums/ en Fri, 18 May 2012 03:08:09 GMT vBulletin 60 http://www.hondaatvforums.net/forums/images/misc/rss.jpg http://www.hondaatvforums.net/forums/ http://www.hondaatvforums.net/forums/around-garage/22510-honda-slogans.html Fri, 18 May 2012 03:02:40 GMT Just wondering how many different slogans honda has had over the years? The one that stands out to me is "follow the leader, he's on a honda!" Still remember the little jingle that went with this one. So what's your favorite or which one sticks in your mind? ]]> Around The Garage Kevron http://www.hondaatvforums.net/forums/around-garage/22510-honda-slogans.html http://www.hondaatvforums.net/forums/honda-trx/22509-no-spark-after-5-minutes.html Fri, 18 May 2012 02:11:03 GMT I have a 2001 250 it ran great for a long Time then it died so I went threw my thing trying to get it running changed the plug checked spark it had... I have a 2001 250 it ran great for a long Time then it died so I went threw my thing trying to get it running changed the plug checked spark it had spark then it started ran for about 5 min and died so a fools around with it checked spark again no spark a friend of mine said cdi box so I bought. A new one but it still will run for 5 min and die any suggestions ]]> Honda TRX 85rat http://www.hondaatvforums.net/forums/honda-trx/22509-no-spark-after-5-minutes.html http://www.hondaatvforums.net/forums/honda-trx/22508-400x-engine-quits.html Fri, 18 May 2012 01:49:59 GMT Some times I'll just be riding down the trail at low RPM, and the engine just dies, it always immediately starts back but it worries me. My bike has around 700 miles on it and the engine is all stock. I've never changed the spark plug or the fuel filter just to name a few things. ]]> Honda TRX rrjii2000 http://www.hondaatvforums.net/forums/honda-trx/22508-400x-engine-quits.html http://www.hondaatvforums.net/forums/around-garage/22507-me-vs-tree-tree-wins.html Fri, 18 May 2012 01:25:10 GMT I was woods riding today. A little too fast , long story short ,i hit a tree a big tree , bruised hand, shoulder and knee. But not too bad im ok.... I was woods riding today. A little too fast , long story short ,i hit a tree a big tree , bruised hand, shoulder and knee. But not too bad im ok. Just a bent tie rod on the quad. ]]> Around The Garage atvrider13 http://www.hondaatvforums.net/forums/around-garage/22507-me-vs-tree-tree-wins.html http://www.hondaatvforums.net/forums/visual-body-modifications/22506-liscence-plate-mount.html Fri, 18 May 2012 00:46:18 GMT where should i mount my liscence plate? where are yours mounted? where should i mount my liscence plate? where are yours mounted? ]]> exgofast http://www.hondaatvforums.net/forums/visual-body-modifications/22506-liscence-plate-mount.html http://www.hondaatvforums.net/forums/honda-trx/22505-rims-better.html Fri, 18 May 2012 00:15:54 GMT Hey guys i need some help i was wondering what you thought would look better on my 400ex. Image:... Hey guys i need some help i was wondering what you thought would look better on my 400ex.

or

or

Thanks any input ]]> Honda TRX Honda_Shadow18 http://www.hondaatvforums.net/forums/honda-trx/22505-rims-better.html http://www.hondaatvforums.net/forums/wheels-tires/22504-rims-better.html Fri, 18 May 2012 00:09:52 GMT Hey guys i need some help i was wondering what you thought would look better on my 400ex. Image:... Hey guys i need some help i was wondering what you thought would look better on my 400ex.

or

or

Thanks any input ]]> Honda_Shadow18 http://www.hondaatvforums.net/forums/wheels-tires/22504-rims-better.html http://www.hondaatvforums.net/forums/repair-maintenance/22503-i-need-help.html Fri, 18 May 2012 00:08:13 GMT I'm in the process of rebuilding my '87 trx250x. I have it almost back together. My stock cam was worn out of spec so I replaced it with a Hot Cams stage 1 cam. I'm working on re-installing the timing chain on the sprocket and cam with everything below it assembled and am having a hell of a time. The engine will not turn over for me (it's sitting on the bench, maybe I can't get enough leverage on it to turn it over?) to help me out, even with the cam completely out and my brother holding the chain so it could stay tight and roll freely. I originally thought it was because I had no oil in it and the safety mechanism wouldn't let it crank over, so I filled it with Valvoline conventional 10w-40 motorcycle oil and it still won't turn over. Any ideas on why it won't turn over? Also, I can't get the little cover on the left-hand side of the engine off. According to the manual, this shows the timing mark I need to be able to see. ]]> jordandakota http://www.hondaatvforums.net/forums/repair-maintenance/22503-i-need-help.html http://www.hondaatvforums.net/forums/brakes-suspension/22502-rear-shock-adjustment-help.html Thu, 17 May 2012 23:26:08 GMT Im tryin to adjust my rear shock. It was screwed all the way out. Im around 260, how many turns clockwise does it need? Im tryin to adjust my rear shock. It was screwed all the way out. Im around 260, how many turns clockwise does it need? ]]> caleb.22 http://www.hondaatvforums.net/forums/brakes-suspension/22502-rear-shock-adjustment-help.html http://www.hondaatvforums.net/forums/honda-fourtrax/22501-honda-foreman-450-yellow-plastics-1998-2004-a.html Thu, 17 May 2012 23:24:11 GMT hey guys I am looking for some yellow plastics for my 450 S. Let me know if you have something. hey guys I am looking for some yellow plastics for my 450 S. Let me know if you have something. ]]> Honda FourTrax brantley11 http://www.hondaatvforums.net/forums/honda-fourtrax/22501-honda-foreman-450-yellow-plastics-1998-2004-a.html http://www.hondaatvforums.net/forums/honda-rancher/22500-where-fuel-filter.html Thu, 17 May 2012 22:51:27 GMT Tried replacing the plug today but that wasn't the prob on my 420 rancher. It starts missing and stalling everytime after about 15 mins of running. I had it on reserve before this happened so it might of picked up dirt. But the manual doesnt say anything about the filter. Is it inside the pump housing? If so do i need to replace the whole unit? Thanks ]]> Honda Rancher MorganTrail http://www.hondaatvforums.net/forums/honda-rancher/22500-where-fuel-filter.html http://www.hondaatvforums.net/forums/repair-maintenance/22499-honda-trx-200-84-no-power-will-not-start.html Thu, 17 May 2012 22:22:45 GMT It worked a week ago and then it got rained on. Has not started after that. I checked the fuses but would like to know anything I can do to try to... It worked a week ago and then it got rained on. Has not started after that. I checked the fuses but would like to know anything I can do to try to narrow down my problem. I have the manual just looking for some tricks to get me started. ]]> plcahoon http://www.hondaatvforums.net/forums/repair-maintenance/22499-honda-trx-200-84-no-power-will-not-start.html http://www.hondaatvforums.net/forums/atv-media/22498-riding-450r-up-sand-wall.html Thu, 17 May 2012 21:43:12 GMT Sand Wall - YouTube


Half way through it switches to my GoPro cam, be sure to comment and subscribe! ]]> ATV Media HondaRules450 http://www.hondaatvforums.net/forums/atv-media/22498-riding-450r-up-sand-wall.html http://www.hondaatvforums.net/forums/wheels-tires/22497-polishing-alloy-wheels.html Thu, 17 May 2012 21:41:29 GMT I have a set of 'Douglas' wheels (aluminum) I want to polish.
They are not hurt. But, I figure its a EZ mod. to make the bike look better.
What do you use to mak'em shine? What technique did you follow?

I was thinking a tube of Simi-chrome or Flicks polishing paste using a
wool buff with a cordless drill to start.

Then to finish, a 'Mothers' polishing cone and Mothers Mag and wheel polish to keep them looking good.

What can I use to seal the polished wheel sssso I don't have to repolish once a month? ]]> james1300 http://www.hondaatvforums.net/forums/wheels-tires/22497-polishing-alloy-wheels.html http://www.hondaatvforums.net/forums/new-member-introductions/22496-new-ks-ok.html Thu, 17 May 2012 20:41:11 GMT Hello everyone! My name is Matt and I am new to this forum but not new to forums although I usually stick to truck forums. I bought my 06 400ex... Hello everyone!

My name is Matt and I am new to this forum but not new to forums although I usually stick to truck forums.

I bought my 06 400ex in 07 and have only replaced the tires before yesterday. I have a FMF Q4 pipe and an UNI filter with some various jets and spark plugs coming in the mail. I am getting the mod bug and hopefully this cures it for a while. :tongue:

I have looked around on this forum for the past week and finally decided to register! ]]> New Member Introductions The_Chupacabra http://www.hondaatvforums.net/forums/new-member-introductions/22496-new-ks-ok.html