Honda ATV Forum banner

LaPue-mobile Trailer is finished!

1K views 3 replies 4 participants last post by  shadetree 
#1 ·
Due to plans for the Vacation of a Lifetime! this summer, I finally finished the trailer. I cut off the front end of a Yamaha Blaster ATV so I could use the suspension for the trailer. Then a little welding and I added a box. The box is bolted on so it can be changed out. This particular box has to hold 200 mining stakes and some stuff, so it is 36" x 50" x 12".

I test drove the trailer today with 200 pounds of rocks, up and down some local mountains. What a smooth ride! Love the suspension idea and in case you are interested I have some photos to show the major steps of the build. The main thing of course is to have the front end of an ATV lying around and some 1" x 3/16" angle bar.
 

Attachments

See less See more
4
  • Like
Reactions: _Wilson_
#3 ·
A super cool addition would be an electronic power steering setup on the trailer! Totally unnecessary of course but cool!
Trailer looks Fabulous though, good job :)
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top