SS Camaro - Track trips, build pics etc. - Honda ATV Forum
Around The Garage Off-Topic conversations here!

 1Likes
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 28 (permalink) Old 11-21-2015, 03:13 PM Thread Starter
Senior Member
 
01SSRedA4's Avatar
 
Join Date: Jun 2012
Posts: 683
Liked: 24 times
SS Camaro - Track trips, build pics etc.

These events happen over about a 2-3 year period, all condensed down for easy viewing.

Trip 1: Had a small meet up right before the track:

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.
----------------------------------------------------------------------------
----------------------------------------------------------------------------

Track was pretty full and we started late, so i only got 2 runs. First run:

Far lane: 98 Z28, built M6, 4.10s, VR reverse split cam, stock heads, full exhaust, bolt ons, 315 Nitto 555Rs on the back.

Near lane: Very close to the same except 3.73s, Cam Motion cam, and ET Streets on factory wheels.

SS whoops Z28 - YouTube

Time slip:

Left........Right
.468.......105 Reaction
1.94.......1.65 60ft
7.98.......7.54 8th E.T.
90.4.......90.2 8th MPH
12.26.....11.85 1/4 E.T.
115.9.....114.1 1/4 MPH

Here's some pics from this race:
Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.


2nd race:

Far Lane: Z28, 6.0 LQ4, built M6, 12 bolt with 4.56, Pat G cam, TFS 215 heads, bolt ons, Mufflex exhaust, 28 inch ET Streets

Near lane: Same as near lane above

SS VS. Z28 - YouTube

Time slip:
Left.......Right
.569.......117
2.15.......1.71
8.37.......7.63
89.5.......90.0
12.63....11.95
117.5....113.8

--------------------------------------------------------------------------------
Sir_Diealotz likes this.

06 Foreman 500 - 29.5 OG Laws, SS212s, 35%, Warn 2.5k, HL^2", <2.5">, EPI, HMF
95 Fourtrax 300 - 27" Zillas, SS212s , Viper 3k, HL^2"
04 XR80 - Stock
07CRF50 - Stock
01SSRedA4 is offline  
Sponsored Links
Advertisement
 
post #2 of 28 (permalink) Old 11-21-2015, 03:13 PM Thread Starter
Senior Member
 
01SSRedA4's Avatar
 
Join Date: Jun 2012
Posts: 683
Liked: 24 times
More pics:

Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.

----------------------------------------------------------------------------------

Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.

----------------------------------------------------------------------------------

06 Foreman 500 - 29.5 OG Laws, SS212s, 35%, Warn 2.5k, HL^2", <2.5">, EPI, HMF
95 Fourtrax 300 - 27" Zillas, SS212s , Viper 3k, HL^2"
04 XR80 - Stock
07CRF50 - Stock
01SSRedA4 is offline  
post #3 of 28 (permalink) Old 11-21-2015, 03:14 PM Thread Starter
Senior Member
 
01SSRedA4's Avatar
 
Join Date: Jun 2012
Posts: 683
Liked: 24 times
Couple more videos:

http://www.youtube.com/watch?v=Zcuu_QfX7fI

http://www.youtube.com/watch?v=Qmn2kMof1x0

http://www.youtube.com/watch?v=4SCDyxFB8NI

http://www.youtube.com/watch?v=YmIW3aOtkvo

As a sidenote, I got my shifting issues worked out. Turns out my mph on my trans tables was off by about 5 mph and it was causing all hell to break loose at WOT. Its fixed now so next time the car should see some honest mid 11s cam only. Waiting for the heat to die down some.

---------------------------------------------------------------------------------------

Fast Forward: Went back to the track this past friday. Finally got the car off the limiter. Best run was still about 11.8x. Couldn't get it to go any faster. I had a new best 60ft of around 1.58 and a new best trap of 115. DA was about 1650 at the time of the runs. Couldn't seem to get the ETs down though. My only 2 vids from that night are shitty but I will link one from someone else:

http://www.youtube.com/watch?v=1I0-yundanU

Car was filthy: Right lane

Click the image to open in full size.

Click the image to open in full size.


Left lane:


Click the image to open in full size.

---------------------------------------------------------------------------------------

06 Foreman 500 - 29.5 OG Laws, SS212s, 35%, Warn 2.5k, HL^2", <2.5">, EPI, HMF
95 Fourtrax 300 - 27" Zillas, SS212s , Viper 3k, HL^2"
04 XR80 - Stock
07CRF50 - Stock
01SSRedA4 is offline  
Sponsored Links
Advertisement
 
post #4 of 28 (permalink) Old 11-21-2015, 03:14 PM Thread Starter
Senior Member
 
01SSRedA4's Avatar
 
Join Date: Jun 2012
Posts: 683
Liked: 24 times
Fast Forward Again: Well we headed back out. Car ran a new best, but still had more in it. Couldn't get it to leave good. Here are the slips in order:

60ft...........1/8....................1/4
1.65......7.58/89.5...........11.94/112.7
1.65......7.55/90.6...........11.87/113.5
1.73......7.62/90.8...........11.93/113.9 Spun some out of the hole.
1.62......7.51/90.2...........11.84/113.6
1.62......7.47/91.0...........11.77/113.6
1.62......7.47/91.1...........11.77/114.9


Pics and vids:

Click the image to open in full size.


Click the image to open in full size.

http://www.youtube.com/watch?v=JduUkFS1rJw



http://www.youtube.com/watch?v=iMxftKo_dCQ

----------------------------------------------------------------------------------------

06 Foreman 500 - 29.5 OG Laws, SS212s, 35%, Warn 2.5k, HL^2", <2.5">, EPI, HMF
95 Fourtrax 300 - 27" Zillas, SS212s , Viper 3k, HL^2"
04 XR80 - Stock
07CRF50 - Stock
01SSRedA4 is offline  
post #5 of 28 (permalink) Old 11-21-2015, 03:15 PM Thread Starter
Senior Member
 
01SSRedA4's Avatar
 
Join Date: Jun 2012
Posts: 683
Liked: 24 times
4th Trip out: Track altitude: about 250 ft, DA for the night: about 2250. Yeah it was muggy with about 80-90% humidity. But we ran anyway for fun. Car ran good for the weather I thought, and pulled the driver tire 6-8 inches every run. Felt awesome :drive:

Here's how the slips stacked up:
Time...7:14.....7:18.....9:08.....9:34.....9:40... ....9:49
60'.....1.591....1.602...1.581....1.590...1.596... ..1.608
1/8.....7.350....7.342...7.316....7.344...7.321..... 7.327
1/8.....92.48....92.66...92.76....92.47...92.91..... 93.06
1/4....11.573..11.539..11.525..11.568..11.526...11.5 17
1/4....116.82..117.13..117.14..116.55..117.08...117. 59

And a couple of vids:
VID 20130531 222530 757 - YouTube

VID 20130531 220957 349 - YouTube

Since the last run it has a Fast92, AI 243s, PA Racing K member, Midwest bumper supports F+R, Strange 12 bolt. I was running about 3/4 tank of gas and an ice chest in the back. I know the 12 bolt is slowing me down some (over the previous runs) but I drove home so it's worth it Car is also tuned by a rookie tuner (me) and is set to conservatively shift around 6400. It ran exactly how you would find it any day on the street. Nothing added or subtracted.

----------------------------------------------------------------------------------------

Have run recently about 10 more passes. Changes are: Lightweight battery, Midwest chassis drag bar, speed inc carpet, sjm abs delete, firecore50 wires.....ET streets are bald and it was acting funky coming out of the hole but I did get a new personal best, 1.56 60ft, 7.20@95. Track wasn't running 1/4 at the time but I'm predicting it was a legitimate 11.30 pass. New changes are removing inner fender supports, removing front sway bar, aluminum radiator, and a full 17"Racestar setup. Inching closer to 10s NA I hope.

Here's some eye candy:

Stock carpet ready to be pulled:

Click the image to open in full size.

Pulled the gauges to delete the idiot lights:

Click the image to open in full size.

Letting the new carpet breathe, it does still have some padding under it, but it is a little louder then stock:

Click the image to open in full size.

Found under the stock carpet.....winning!!!

Click the image to open in full size.

Lightweight battery getting its first charge:

Click the image to open in full size.

Simple aluminum flat bar hold down:

Click the image to open in full size.

----------------------------------------------------------------------------------------

06 Foreman 500 - 29.5 OG Laws, SS212s, 35%, Warn 2.5k, HL^2", <2.5">, EPI, HMF
95 Fourtrax 300 - 27" Zillas, SS212s , Viper 3k, HL^2"
04 XR80 - Stock
07CRF50 - Stock
01SSRedA4 is offline  
post #6 of 28 (permalink) Old 11-21-2015, 03:16 PM Thread Starter
Senior Member
 
01SSRedA4's Avatar
 
Join Date: Jun 2012
Posts: 683
Liked: 24 times
Midwest drag bar:

Click the image to open in full size.

Click the image to open in full size.

Firecore50 wires:

Click the image to open in full size.

Click the image to open in full size.

Full 17" Racestar setup. Hoosier ProStreet 26x7.5x17 fronts, new ET Radials in the rear:

Click the image to open in full size.

Peek-a-boo:
Click the image to open in full size.

Click the image to open in full size.

For the bushes:
Click the image to open in full size.

-----------------------------------------------------------------------------------

$135 shipped:
Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

-----------------------------------------------------------------------------------------

06 Foreman 500 - 29.5 OG Laws, SS212s, 35%, Warn 2.5k, HL^2", <2.5">, EPI, HMF
95 Fourtrax 300 - 27" Zillas, SS212s , Viper 3k, HL^2"
04 XR80 - Stock
07CRF50 - Stock
01SSRedA4 is offline  
post #7 of 28 (permalink) Old 11-21-2015, 03:16 PM Thread Starter
Senior Member
 
01SSRedA4's Avatar
 
Join Date: Jun 2012
Posts: 683
Liked: 24 times
Truth be told, the radiator swap and inner fender cutting was a kill two birds with one stone kind of deal. The last outing to the track I ripped a huge gash in the bumper. I installed a bracket to move my car ramps closer for when I load my ATVs on my car hauler....and I new it was close but had loaded successfully several times before. This time I wasn't so lucky.......

Ouch:
Click the image to open in full size.

Did a quick patch and we raced anyway:
Click the image to open in full size.

But I needed a fix...so I found a place called OnlinePartsBin (or something of the nature) and they did a VIN matched paint and then shipped the bumper for $250. So I took it apart while I waited....lead time was about 2 weeks.

Click the image to open in full size.

I've always hated the China halo lights so I found a set of OEMs to go back on:

Click the image to open in full size.

The busted bumper and china lights got hung for decoration:

Click the image to open in full size.

And, 3 weeks later Fedex drops this beauty off:

Click the image to open in full size.

Thanks EmblemPros:

Click the image to open in full size.

Click the image to open in full size.

Two more random tire pics:
Click the image to open in full size.

Click the image to open in full size.

--------------------------------------------

Time....7:56......8:05.....8.35.....8.39
60'.......1.59......1.55.....1.67.....1.55
1/8.......7.24......7.19.....7.35.....7.18
MPH......94.18....94.37...93.97...94.24
1/4.......11.40....11.34...11.52...11.32
MPH......118.4....118.7...118.2...118.8

Wheel spin on the 3rd pass, 64/6500 shifts for 1 and 2, then 6700 for 3 and 4. Looks like I gained next to nothing by putting the shifts higher.

Time.....12:17.....12:35......12:46.......12:59
60ft........1.52......1.53.........1.53.........1. 54
1/8th......7.14......7.14..........7.13........7.16
MPH........94.2......94.4.........94.5.........94. 3
1/4........11.30....11.293....11.27......11.32

No changes.

-----------------------------------------------------

06 Foreman 500 - 29.5 OG Laws, SS212s, 35%, Warn 2.5k, HL^2", <2.5">, EPI, HMF
95 Fourtrax 300 - 27" Zillas, SS212s , Viper 3k, HL^2"
04 XR80 - Stock
07CRF50 - Stock
01SSRedA4 is offline  
post #8 of 28 (permalink) Old 11-21-2015, 03:17 PM Thread Starter
Senior Member
 
01SSRedA4's Avatar
 
Join Date: Jun 2012
Posts: 683
Liked: 24 times
Most recent, Go-Pro

LSX Monsters Track Day - YouTube

At 0:25 in this one

RUN WUTCHA BRUNG at LSX SHOOTOUT TEST N TUNE! - YouTube

At 1:00 in this one:

LSX MONSTERS & BLUE THUNDER 2 RACING! - YouTube

Click the image to open in full size.Click the image to open in full size.Click the image to open in full size.

Midwest Chassis rear bumper support but it isnt new.....
Click the image to open in full size.

A full 10lbs of metal removed, about 1 pound went back in.
Click the image to open in full size.

Click the image to open in full size.

Losing the catback and 4" cutout, going to a single 4" bullet. Total weight lost will be a minimum of 35 lbs.
Click the image to open in full size.

Click the image to open in full size.

I love stock appearance......

Click the image to open in full size.

Click the image to open in full size.


To come.....
Click the image to open in full size.

I also have a 5 gallon bucket of misc brackets, bolts, back of the radio etc thats up to 30lbs and Im not near done yet. I also found a full gallon of coolant in the spare tire well so figure that was an extra 8 pounds I was dragging around for nothing :bang:

06 Foreman 500 - 29.5 OG Laws, SS212s, 35%, Warn 2.5k, HL^2", <2.5">, EPI, HMF
95 Fourtrax 300 - 27" Zillas, SS212s , Viper 3k, HL^2"
04 XR80 - Stock
07CRF50 - Stock
01SSRedA4 is offline  
post #9 of 28 (permalink) Old 11-21-2015, 03:18 PM Thread Starter
Senior Member
 
01SSRedA4's Avatar
 
Join Date: Jun 2012
Posts: 683
Liked: 24 times
Got a chance to tinker some more.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Decided to run the 4" pipe all the way out the back for the fumes, and the drone. I realized I had to delete the upper panhard support brace to make room for the pipe. I don't trust running without one so I fabbed up some supports of my own.

Click the image to open in full size.

Running vertically supporting the bracket

Click the image to open in full size.

This is what I started with, to go after the Y merge.

Click the image to open in full size.

It snaked over the rear end quite nicely, with a little gap on top and bottom. Its fucking loud.....

Click the image to open in full size.

After some inspecting I realized WOT blasts make for super hot exhaust pipes. Was too close to the gas tank for comfort and melted a tiny bit of the bumper. So I wrapped the rear section and repositioned the tailpipe slightly.

Click the image to open in full size.

The cutout i removed.
Click the image to open in full size.

Got to tinker some today. Switched from a Chrs1313 AC ram air to a SSRA Megamouth (non-AC) ram air

Click the image to open in full size.

Cut out the lower radiator support. It was worth 5lbs. The edges of the bracket are still strong enough for an adult male to hang from. I'm gonna run some aluminum flat bar across to give the air dam something to mount to.

Click the image to open in full size.

Click the image to open in full size.

Before my 11.2 run I had done the following weight reduction:

ABS Delete: 10
Bumper supports F+R: 40
9.5" converter: 15
Cruise delete: 5
Power seat delete: 10
Lightweight battery: 20
Spare tire delete: 20
Monsoon delete: 20
K Member: 30
Front swaybar delete: 15
Midwest rear bar: 5
Front fender cut: 5
Lightweight carpet: 20
Driver airbag delete: 5
Total: 220 lost

Since I've done:
AC Compressor/bracket: 20
Sway bar brackets: 5
AC fan delete: 5
Lower radiator support cut: 5
Catback delete: 30
Misc bucket of brackets: 35
Spool: 20
Condensor and evap: 5
Coilovers: 10
Spare tire well delete: 10
Upper panhard delete: 5
Total so far: 150

Total 370 lbs.

06 Foreman 500 - 29.5 OG Laws, SS212s, 35%, Warn 2.5k, HL^2", <2.5">, EPI, HMF
95 Fourtrax 300 - 27" Zillas, SS212s , Viper 3k, HL^2"
04 XR80 - Stock
07CRF50 - Stock
01SSRedA4 is offline  
post #10 of 28 (permalink) Old 11-21-2015, 03:20 PM Thread Starter
Senior Member
 
01SSRedA4's Avatar
 
Join Date: Jun 2012
Posts: 683
Liked: 24 times
I was concerned with the air going around the radiator since the condenser was gone. So I fabbed up a couple pieces out of ABS, pictured here plus the hole I was facing.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Life gets in the way at times, but I'm still working on it.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

--------------------------------------------------

06 Foreman 500 - 29.5 OG Laws, SS212s, 35%, Warn 2.5k, HL^2", <2.5">, EPI, HMF
95 Fourtrax 300 - 27" Zillas, SS212s , Viper 3k, HL^2"
04 XR80 - Stock
07CRF50 - Stock
01SSRedA4 is offline  
Reply

  Lower Navigation
Go Back   Honda ATV Forum > Honda ATV Discussions > Around The Garage

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Honda ATV Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome